Isithambisi somlilo esingenalo i-TF-AMP se-adhesive se-acrylic esingenalo i-halogen
Imininingwane
| Imininingwane | I-TF-AMP |
| Ukubukeka | Impuphu emhlophe |
| Okuqukethwe kwe-P2O5 (w/w) | ≥53 |
| Okuqukethwe okungu-N (w/w) | ≥11% |
| Umswakama (w/w) | ≤0.5 |
| Inani le-PH (ukumiswa kwamanzi okungu-10%, ku-25ºC) | 4-5 |
| Usayizi wezinhlayiya (µm) | D90<12 |
| D97<30 | |
| D100<55 | |
| Ubumhlophe | ≥90 |
Izici
1. Ayiqukethe ama-halogen nama-ion ensimbi esindayo.
2. Ukusebenza okuhle kakhulu okuvimbela umlilo, engeza u-15% ~ 25%, okungukuthi, kungafeza umphumela wokuzicisha emlilweni.
3. Usayizi wezinhlayiya ezincane, ukuhambisana kahle neglue ye-acrylic, kulula ukuyihlakaza kuglue ye-acrylic, ithonya elincane ekhonweni lokubopha iglue.
Isicelo
Ifanele imikhiqizo yokunamathela enamafutha e-acrylic kanye nemikhiqizo yokunamathela enesakhiwo esifanayo se-acrylic acid ikakhulukazi ifaka: ukunamathela okuzwela ukucindezela, i-tissue tape, i-PET film tape, i-structural adhesive; i-Acrylic glue, i-polyurethane glue, i-epoxy glue, i-hot melt glue kanye nezinye izinhlobo zokunamathela.
I-TF-AMP isetshenziselwa ingcina ye-acrylic evimbela ilangabi (ekhuhlwe futhi imbozwe ohlangothini olulodwa lwephepha lezicubu, ubukhulu obungu-≤0.1mm). Izibonelo zokusetshenziswa kwefomula evimbela ilangabi yilezi ezilandelayo ukuze kubhekwe kuzo:
1. Ifomula:
|
| Ingcina ye-acrylic | I-Diluent | I-TF-AMP |
| 1 | 76.5 | 8.5 | 15 |
| 2 | 73.8 | 8.2 | 18 |
| 3 | 100 |
| 30 |
2. Ukuhlolwa komlilo ngemizuzwana eyi-10
|
| Isikhathi sokudubula | Isikhathi sokucima umlilo |
| 1 | 2-4s | 3-5s |
| 2 | 4-7s | Amasekhondi angu-2-3 |
| 3 | Amasekhondi angu-7-9 | 1-2s |
Ukuboniswa Kwesithombe
Bhala umlayezo wakho lapha bese uwuthumela kithi
Imikhiqizo ehlobene
Imikhiqizo ehlobene
